Operation mode:12/24VDC auto work
Application area:RV, communication base station, household system, field monitoring and many other areas.
PRTC-E series controller is based on common negative design and advanced MPPT control algorithm, with LCD displaying running status, this product is artistic, economical and practical. The MPPT control algorithm can minimize the maximum power point loss rate and loss time, quickly track the maximum power point of the PV array and obtain the maximum energy from solar modules under any conditions; and can increase the ratio of energy utilization in the solar system by 20%-30% compared with a PWM charging method.
Limiting the charging power & current and reducing charging power functions ensure the system stable with over PV modules in high temperature environment. and increase the professional protection chip for the RS485 port, further improving the reliability and meeting the different application requirements.
PRTC-E series controller owns self-adaptive three-stage charging mode based on digital control circuit, which can effectively prolong the lifespan of battery and significantly improve the system performance. It also has comprehensive electronic protection for overcharge, overdischarge, PV & battery reverse etc, to ensure the solar system more reliable and more durable. This controller can be widely used for RV, communication base station, household system, field monitoring and many other areas.
· 100% charging and discharging in working environment temperature
· High quality and low failure rate components(ST/IR/Infineon) to ensure service life
· Advanced MPPT technology, with efficiency no less than 99.5%
· Maximum DC/DC conversion efficiency of 98%
· Ultra-fast tracking speed and guaranteed tracking efficiency
· Advanced MPPT control algorithm to minimize the MPP loss rate and loss time
· Accurate recognition and tracking of multiple-peaks maximum power point
· Wide MPP operating voltage range
· Limit charging power & current over rated range
· Support the lead-acid and lithium batteries with the needed tem. compensation
· Real-time energy statistics function
· Power reduction automatically over temperature range
· Multiple load work modes
· Comprehensive electronic protection
· RS485 with 5V/100mA protected output for no power devices, with Modbus
· Monitor and set the parameters via APP or PC software
RV, communication base station, household system, field monitoring and many other areas.
Item | PRTC-1024 PRTC-1024E | PRTC-2024 PRTC-2024E | PRTC-3024E | PRTC-4024E |
Dimension | 172x139 x 44mm | 220x154x 52mm | 228x164x55mm | 252x180x63mm |
Mounting dimension | 130x130mm | 170x145mm | 170x164mm | 210x171mm |
Mounting hole size | Φ5mm | |||
Terminal | 12AWG(4mm2) | 6AWG(16mm2) | 6AWG(16mm2) | 6AWG(16mm2) |
Recommended cable | 12AWG(4mm2) | 10AWG(6mm2) | 8AWG(10mm2) | 6AWG(16mm2) |
Weight | 0.57kg | 0.94kg | 1.26kg | 1.65kg |
Item | PRTC-1024 | PRTC-2024 | PRTC-1024E | PRTC-2024E | PRTC-3024E | PRTC-4024E |
System nominal voltage | 12/24VDC① Auto | |||||
Rated charge current | 10A | 20A | 10A | 20A | 30A | 40A |
Rated discharge current | 10A | 20A | 10A | 20A | 30A | 40A |
Battery voltage range | 8~32V | |||||
Max. PV open circuit voltage | 60V② | 100V② | ||||
46V③ | 92V③ | |||||
MPP voltage range | (Battery voltage +2V)~36V | (Battery voltage +2V)~72V | ||||
Max. PV input power | 130W/12V | 260W/12V | 130W/12V | 260W/12V | 390W/12V | 520W/12V |
260W/24V | 520W/24V | 260W/24V | 520W/24V | 780W/24V | 1040W/24V | |
Self-consumption | ≤12mA | |||||
Discharge circuit voltage drop | ≤0.23V | |||||
Temperature compensate coefficient④ | -3mV/℃/2V (Default) | |||||
Grounding | Common negative | |||||
RS485 interface | 5VDC/100mA | |||||
LCD backlight time | Default:60S,Range:0~999S(0S:the backlight is ON all the time) |
①When a lithium battery is used, the system voltage can’t be identified automatically.
②At minimum operating environment temperature
③At 25℃ environment temperature
④When a lithium battery is used, the temperature compensate coefficient will be 0,and can’t be changed.
Working environment temperature◆ | -25℃~+45℃(100% input and output) |
Storage temperature range | -20℃~+70℃ |
Relative humidity | ≤95%, N.C. |
Enclosure | IP30 |
◆The controller can full load working in the working environment temperature, When the internal temperature is 81℃, the reducing power charging mode is turned on. Refer to P24.